HPE 817106-001 480GB 2.5in SATA-6G SC Mixed Use G8 G9 SSD

HPE 817106-001 480GB 2.5inch Small Form Factor SATA-6Gbps Smart Carrier Mixed Use-3 Solid State Drive for ProLiant Gen8 Gen9 Servers (New Bulk Pack with 90 Days Warranty)

HPE Server Mixed Use (MU) Solid State Drives (SSDs) deliver high performance and endurance while reducing power consumption for customers with applications requiring high random read and write IOPs performance. HPE MU SSDs offer the highest performance applications that need a balance of strong read and write and they typically have an endurance of between <1 and <10 drive writes per day. HPE SSDs are backed by over 2.4 million hours of the industry’s most rigorous testing and qualification program ensuring reliable, high performing drives. HPE integrated firmware protects data from malicious attacks that could change or destroy it. The self-describing icons on the HPE SMART Carrier takes the guess work out of a drive’s status and a “do not remove” button prevents data loss from human error. You can monitor the lifespan of your SSD with HPE SmartSSD Wear Gauge compatibility in management tools.

High Performance, Exceptional Reliability and Efficiency for Faster Business Results
HPE Mixed Use (MU) Solid State Drives (SSD) are ideal for Big Data Analytics, Cloud Computing, Active Archiving, Database Applications and Data Warehousing.
Achieve higher Input / Output per Second (IOPs) to enhance the performance of your data center.
Maintains data accuracy with full data-path error detection.
A broad portfolio of optimized solutions in capacities up to 1.6 TB and growing.
12 GB SAS, 6 GB SATA and NVMe.

HPE Solid State Drives (SSDs), Add-In-Cards, M.2s and M.2 Enablement Kits (EKits) are based upon industry leading NAND Flash technology, which delivers exceptional performance and endurance to support a growing broad spectrum of demanding applications with varying workload performance requirements.

These storage devices offer better I/O latency & more power efficient solutions when compared with traditional rotating (HDD) media, while also fitting seamlessly into existing HPE server & storage infrastructures, and are available in a number of form factors including: Small Form Factor (SFF), Large Form Factor (LFF), M.2, and PCIe/NVME Add-In-Cards (AIC).

HPE Solid State Drives (SSDs) deliver exceptional performance and endurance for customers with applications requiring high random read IOPs performance. Leveraging NAND Flash technology, they support HPE ProLiant servers and server storage platforms. They are generally available as Small Form Factor (SFF) and Large Form Factor (LFF) hot plug devices, non - hot plug SFF devices, and SFF Quick Release devices. These drives deliver higher performance, lower latency, and more power - efficient solutions when compared with traditional rotating media. Plus they fit seamlessly into the existing HPE server infrastructure.

SmartDrive Carriers
HPE Hard Drives with smart carriers are designed to provide an interface to communicate critical status and management information. System status LED icons and a spinning activity ring reflecting the data-writing process notify users of the current system status. A blue LED located behind the handle can be activated remotely to guide users to a specific drive tray, while a do-not-remove icon positioned on the tray's eject button lights up to warn users when the removal of the drive would cause data loss.

HPE Solid State Drives (SSD)

Excellent solid state storage performance for HPE ProLiant and HPE Synergy servers
It is estimated that 2.5 exabytes (a billion gigabytes) of data are created every day. To tap the potential of Big Data, applications must read and write more data, faster than ever. HPE Solid State Drives help you access data faster by providing exceptional performance, extended endurance, and consistently low latency—all while using less power. With current transitions in the Hard Disk Drive (HDD) industry, many customers are now experiencing the great performance of SSDs at competitive pricing, especially for capacities under 1 TB.

HPE Mixed Use Solid State Drives
HPE Mixed Use 12G SAS and 6G SATA SSDs are best suited for high I/O applications with workloads balanced between reads and writes. The SAS and SATA SSDs provide the workload-optimized performance required for demanding I/O-intensive applications. When paired with HPE ProLiant servers, these SSDs help you meet the challenges of Big Data. They achieve twice the performance and endurance of previous HPE SAS and SATA SSDs. The SATA SSDs come with a six gigabit per second (Gb/s) SATA hot-plug interface.

Benefits of HPE Solid State Drive (SSD)

Peak performance for random data applications
HPE SSDs are suited to enterprise environments with highly random data under a variety of write-workload applications. The SSDs provide significantly better random read and write I/O operations per second (IOPS) compared to HDDs. While sequential read and write throughput is also improved over HDDs, the greatest benefit is recognized in random data applications. As a result, these high-performance, low-latency, and low-power SSDs provide significant system benefits for applications that previously over-provisioned HDD capacity to achieve better performance.

Enterprise features for data center applications
HPE Solid State Drives have the key features you need in your data center—full data path error detection, surprise power loss protection, and HPE SmartSSD Wear Gauge support. The SmartSSD Wear Gauge is enabled through the HPE Smart Carrier. With the SmartSSD Wear Gauge utility, HPE SSDs monitor the amount of data written and report when the device may be nearing its maximum supported 30 Days.

Targeted at extreme operating environments or local storage, these drives provide higher I/O throughput, excellent latency, reduced power consumption, enhanced reliability, and faster reads and writes when compared to traditional rotating media. They remove the latency found in conventional rotating HDDs caused by seek time for each read operation, so they deliver high random read performance. Most of these SSDs are available as small form factor (SFF), large form factor (LFF), quick release carriers, or non-hot plug (NHPE) for general use across the HPE ProLiant Server portfolio. The drives are fully qualified and fit seamlessly into the existing HPE server infrastructure. With no moving parts, more reliability, and greater power savings than traditional rotating media drives, SSDs are finding new applications in the Big Data era.

Compatible with your server environment
HPE SSDs are fully tested and qualified to enable compatibility with HPE ProLiant, HPE Synergy, and HPE BladeSystem solutions. The HPE Qualified Option designation places HPE SSDs among the best of the best compared to products available on the open market. It is important to note that SSDs on the open market—even those with similar vendor model numbers—may not have the same level of performance, endurance, and quality as HPE Qualified Options. For example, the NAND or even the controller in non-qualified products may be different from an HPE Qualified Option. HPE firmware optimizes our qualified SSD performance, wear leveling, and over-provisioning.

The right SSD for every application
HPE SSDs are available in three broad categories based on their typical target workloads: Read Intensive, Mixed Use, and Write Intensive. Simply choose the category that best fits your business needs.

Provides simplicity and lower total cost of ownership
HPE Solid State Drives deliver reduced power consumption, providing improved IOPS/W versus rotating media while reducing datacenter cooling costs. With compatibility in management tools, SmartSSD Wear Gauge prevents data loss and monitors SSD life.

Increases the efficiency of your server
HPE Solid State Drives (SSDs) allow you to get the most out of your server with more compute per watt with SSDs. Uses self-describing LED's that reduces drive activity confusion.

Accelerate workload performance with high performing HPE solid state drives
HPE Solid State Drives (SSDs) achieve higher Input/Output Per Second (IOPs) to enhance the performance of your data center. Experience the latest technology in the market and the industry-leading performance of SAS SSDs and NVMe PCIe SSDs.

Delivers the high reliability you can count on in your data center
HPE Solid State Drives (SSDs) are rigorously tested for hours to achieve the quality standards you need. You can rely on SSDs in various environments as they can tolerate significantly high operating shock and vibration levels. HPE firmware provides compatibility with ProLiant Server series and HP controllers for consistency of performance.

HPE Solid State drives offer the speed, flexibility and expandability to meet your growing storage capacity requirements. The HPE 817106-001 model internal Mixed Use-3 Solid State Drive has a 2.5 inch form factor and a 600 MBps data transfer rate. It has a 480 GB capacity. This Small Form Factor solid state drive uses a SATA-6Gbps interface and has 90 Days Warranty.

Specifications

Brand: HPE
MPN: 817106-001

Option Part Number: 816985-B21
Spare Part Number: 817106-001
Model Number: MK0480GFDKR
Assembly Number: 816962-003
HPE GPN: 817039-003

General

Device Type: Solid State Drive - Hot-Swap
Capacity: 480 GB
Form Factor: 2.5 inch SFF
Interface: SATA 6Gbps
Bytes per Sector: 512
Workload Type: Mixed Use
Plug Type: Hot Plug
Flash Type: eMLC
Carrier Type: Smart Carrier
Features: TRIM Support, Power Loss Support
Bundled with: HPE SmartDrive Carrier

Performance

Drive Transfer Rate: 600 MBps (external)
Endurance DWPD: 3
MAX Seq. Reads Throughput (MiB/s): 535
MAX Seq. Writes Throughput (MiB/s): 495
Random Read Average Latency uSec (4KiB,Q1): 100
Random Write Average Latency uSec (4KiB,Q1): 38
Random Read IOPS (4KiB, Q=16): 67000
Random Write IOPS (4KiB, Q=16): 26500
MAX Random Read IOPS (4KiB): 75000@Q32
MAX Random Write IOPS (4KiB): 26500@Q1
4KiB Random 70% Read / 30% Write, Queue 32 Performance (IOPS) VI-1: 57000
4KiB Random 50% Read / 50% Write, Queue 32 Performance (IOPS) VI-2: 48000

Expansion & Connectivity

Interfaces: 1 x SATA 6 Gb/s
Compatible Bay: 2.5" SFF

Reliability

MTBF: 2400000 hours

Power Consumption

Power Idle Time: 1.32 Watt
Power Random Read: 2.31 Watt
Power Random Write: 2.31 Watt
Power Sequential Read: 2.50 Watt
Power Sequential Write: 2.45 Watt
Power Random R/W: 2.31 Watt

Environmental Parameters

Min Operating Temperature: 32 °F
Max Operating Temperature: 140 °F

Compatibility Information

Designed for

HPE ProLiant DL Series: DL180 Gen9 (2.5 inch), DL180 Gen9 Base (2.5 inch), DL180 Gen9 Entry (2.5 inch), DL180 Gen9 Storage (2.5 inch), DL20 Gen9 (2.5 inch), DL20 Gen9 Entry (2.5 inch), DL20 Gen9 Performance (2.5 inch), DL580 Gen9 (2.5 inch), DL580 Gen9 Database (2.5 inch), DL580 Gen9 SAP HANA Scale-up Base Configuration (2.5 inch) Servers

HPE ProLiant ML Series: ML110 Gen9 (2.5 inch), ML110 Gen9 Base (2.5 inch), ML110 Gen9 Entry (2.5 inch) Servers

HPE ProLiant XL Series: XL170r Gen9 (2.5 inch), XL190r Gen9 (2.5 inch), XL250a Gen9 Accelerator Tray (2.5 inch) Servers

Contact us with any questions or to verify this model’s compatibility with your current server or storage array.