HPE FlexFabric 701531-001 2-Port 10GbE 534FLR-SFP+ Adapter for G9 G10

HPE Flexfabric 701531-001 Dual Port 10Gbps Ethernet PCI Express 2.0 x8 534FLR-SFP+ Network Adapter for ProLiant Gen9 Gen10 and Apollo Gen9 Gen10 Servers (New Bulk Pack with 90 Days Warranty)

Accelerates Server Performance
The HPE FlexFabric 10Gb 2-port 534FLR SFP+ Adapter boosts network performance with full line-rate 10GbE throughput across all ports. Provides increased server performance by delivering full hardware offload for storage traffic.

Robust Virtualization Capabilities
The HPE FlexFabric 10Gb 2-port 534FLR SFP+ Adapter delivers Single Root I/O Virtualization (SR-IOV) support to allow multiple operating systems to share a physical interconnect. Enhances network management and efficiency with support for VLAN tagging.

Streamlines Deployment and Management
Makes Broadcom QLogic Ethernet solutions available across a wide range of HPE server platforms. Unifies NIC and storage management using HPE ProActive Insight architecture.

The HPE FlexFabric 701531-001 10Gb Dual-Port 534FLR-SFP+ Adapter is a fully featured Ethernet NIC that also support iSCSI and FCoE storage offloads if required. This adapter features the next generation of 10 Gb Ethernet offering in a single chip solution on a FlexibleLOM form factor, further reducing power requirements for 2 ports of 10 Gb Ethernet. It is designed for use with HPE ProLiant servers. For more effective utilization of the 10GbE bandwidth, the HPE 534FLR-SFP+ Adapter offers Switch Independent Network Partitioning (NPAR) which enables segmentation of each 10GbE port into four virtual ports, with flexible allocation of bandwidth to each port. The HPE 534FLR-SFP+ supports enterprise class features such as VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Tunnel offloads (NVGRE, VXLAN), TCP/Ip Stateless Offloads, Receive Side Scaling (RSS), jumbo frames and PXE boot. It also supports virtualization features such as SR-IOVVMware NetQueue and Microsoft VMQ and has 90 Days Warranty.

Specifications

Brand: HPE
MPN: 701531-001

Option Part Number: 700751-B21
Spare Part Number: 701531-001
Assembly Number: 700749-001

General Specifications

Device Type: Network Adapter - FlexFabric
Network Processor: Cavium 57810S chipset
Onboard Memory (Bus Type): PCI Express 2.0 (Gen 2) x8
Form Factor: FlexibleLOM (Standard and low profile adapter compliant with the PCIe standard)

Technical Specifications

Ports: 10 Gigabit SFP+ x 2
Connectivity Technology: Wired
Data Link Protocol: 10 GigE
Data Transfer Rate: 10 Gbps
Status Indicators: Port status, link activity
Features: 802.1Q VLANs, Checksum & Segmentation Offload, Configuration Utilities, DPDK, HPE Sea Of Sensors 3D, IPv6, iSCSI/FCoE, Management Support, Message Signaled Interrupt (Extended) (MSI-X), Network Adapter Teaming, Network Partitioning (NPAR), Optimized for Virtualization, LED Indicators, Preboot eXecution Environment (PXE), Receive Side Scaling (RSS), Server Integration, Single-Root I/O Virtualization, TCP/UDP/IP, TOE, Tunnel Offload, VMware NewQueue and Microsoft Virtual Machine Queue (VMQ), Wake-on-LAN
IEEE Compliance: 802.3, 802.3ae, 802.3x, 802.2x, 802.3ad, 802.1Qaz, 802.1Qau, 802.1Qbb, 802.1Qbg, 802.1ax
Jumbo Frames: 9000 KB

Processor/Memory

Processor: 1 x BCM57810S - Broadcom
RAM: 256 MB

Performance

Data Rate: 2 Ports, each at 20 Gbps bi-directional; 40 Gbps aggregate bi-directional theoretical bandwidth

Expansion & Connectivity

Interfaces: 2 x 10Gb Ethernet - SFP+

Power

Power Requirement: 9 Watt Maximum

Product Dimensions & Weight

Height: 2.44 inch
Width: 6.60 inch
Depth: 5.43 inch
Weight: 1.00 lbs

Environmental Parameters

Temperature (Operating): 0° to 55°C (32° to 131°F)
Temperature (Non-Operating): -65° to 85° C (-85° to 185° F)
Humidity (Operating): 10% to 90% non-condensing
Humidity (Non-operating): 5% to 95% non-condensing
Emissions Classification: Class A

Agency Approvals

USA: FCC Part 15 Class A
Canada: ICES-003, Issue 4
Japan: VCCI V3 (2010.04) Class A
International: EN55022:2006 + A1:2007 Class A; EN55024:1998+A1:2011+A2; EN61000-3-2:2006, EN61000-3-3:2008
Taiwan: BSMI, CNS13438 (2006) Class A
Australia/New Zealand (AS/NZS): EN55022:2006+A12007 class A
Korea: KN22 Class A, KN24

Compliance

RoHS Compliance: 6 of 6
Safety: UL Mark (USA and Canada), CE Mark, EN 60590

Software/System Requirements

OS Required: SuSE Linux Enterprise Server 11, SuSE Linux Enterprise Server 10, Microsoft Windows Server 2008, Microsoft Windows HPC Server 2008, Oracle Solaris 10, Red Hat Enterprise Linux 6.1, Red Hat Enterprise Linux 5.7, VMware ESXi 5.0 update 1, VMware ESX 4.1 update 2

Compatibility Information

Designed for

HPE Apollo 4200 Gen9 Servers

HPE ProLiant DL Series: DL20 Gen9, DL360 Gen9, DL380 Gen9, DL120 Gen10, DL160 Gen10, DL180 Gen10, DL360 Gen10, DL380 Gen10, DL560 Gen10, DL580 Gen10 and DL325 Gen10 Servers

HPE ProLiant ML Series: ML110 Gen10 and ML350 Gen10 Servers

HPE Apollo XL Series: Apollo 6500 - XL270d Gen9, Apollo 2000 - XL170r Gen10, Apollo 2000 - XL190r Gen10, Apollo 4500 - XL450 Gen10, Apollo 6000 – XL230k Gen10 and Apollo 6500 – XL270d Gen10

Features

802.1Q VLANs
IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of this adapter to be separated into multiple virtual NICs for added network segmentation and enhanced security and performance. VLANs increase security by isolating traffic between users. Limiting the broadcast traffic to within the same VLAN domain also improves performance.

Checksum & Segmentation Offload
Normally the TCP Checksum is computed by the protocol stack. Segmentation Offload is technique for increasing outbound throughput of high-bandwidth network connections by reducing CPU overhead. The technique is also called TCP segmentation offload (TSO) when applied to TCP, or generic segmentation offload (GSO).

Configuration Utilities
This adapter ships with a suite of operating system-tailored configuration utilities that allow the user to enable initial diagnostics and configure adapter teaming. This includes a patented teaming GUI for Microsoft Windows operating systems. Additionally, support for scripted installations of teams in a Microsoft Windows environment allow for unattended OS installations.

Configuration Utilities
This adapter ships with a suite of operating system-tailored configuration utilities that allow the user to enable initial diagnostics and configure adapter teaming. This includes a patented teaming GUI for Microsoft Windows operating systems. Additionally, support for scripted installations of teams in a Microsoft Windows environment allow for unattended OS installations.

DPDK
This adapter supports DPDK with benefit for packet processing acceleration and use in NFV deployments.

Fibre Channel over Ethernet (FCoE)
Combines the functionality of an industry-standard NIC with an industry-proven Fibre Channel to seamlessly converge the traffic over a shared lossless Ethernet network.

HPE Sea of Sensors3D
Support for the HPE Sea of Sensors which is a collection of 32 sensors that automatically track thermal activity - heat - across the server. When temperatures get too high, sensors can initiate fans and make other adjustments to reduce energy usage. A significant improvement lies in the ability to apply fan speed increases only to the portion of the system that is rising in temperature, rather than all six fans in unison, which reduces the amount of energy used for cooling.

IPv6
IPv6 uses 128-bit addressing allowing for more devices and users on the internet. IPv4 supported 32-bit addressing.

Jumbo Frames
This adapter supports Jumbo Frames (also known as extended frames), permitting up to a 9,600 byte (KB) transmission unit (MTU) when running Ethernet I/O traffic. This is over five times the size of a standard 1500-byte Ethernet frame. With Jumbo Frames, networks can achieve higher throughput performance and greater CPU utilization. These attributes are particularly useful for database transfer and tape backup operations.

LED Indicators
LED indicators show link integrity and network activity for easy troubleshooting.

Jumbo Frames
This adapter supports Jumbo Frames (also known as extended frames), permitting up to a 9,600 byte (KB) transmission unit (MTU) when running Ethernet I/O traffic. This is over five times the size of a standard 1500-byte Ethernet frame. With Jumbo Frames, networks can achieve higher throughput performance and greater CPU utilization. These attributes are particularly useful for database transfer and tape backup operations.

Message Signaled Interrupt (Extended)(MSI-X)
Message Signaled Interrupt (Extended) provides performance benefits for multi-core servers by load balancing interrupts between CPUs/cores.

Network Adapter Teaming
This adapter support for NIC teaming helps IT administrators increase network fault tolerance and increased network bandwidth, the team of adapters can work together as a single virtual adapter, providing support for several different types of teaming enabling IT administrators to optimize availability, improve performance and help reduce costs.

Network Partitioning (NPAR)
This adapter supports Network Partitioning (NPAR) allowing administrators to configure a 10 Gb port as four separate partitions or physical functions. Each PCI function is associated with a different virtual NIC. To the OS and the network, each physical function appears as a separate NIC port.

Optimized for Virtualization
I/O Virtualization support for VMware NetQueue and Microsoft VMQ helps meet the performance demands of consolidated virtual workloads.

Preboot eXecution Environment (PXE)
Support for PXE enables automatic deployment of computing resources remotely from anywhere. It allows a new or existing server to boot over the network and download software, including the operating system, from a management/ deployment server at another location on the network.
Additionally, PXE enables decentralized software distribution and remote troubleshooting and repairs.

Receive Side Scaling (RSS)
RSS resolves the single-processor bottleneck by allowing the receive side network load from a network adapter to be shared across multiple processors. RSS enables packet receive-processing to scale with the number of available processors.

Server Integration
This adapter is a validated, tested, and qualified solution that is optimized for HPE ProLiant servers. Hewlett Packard Enterprise validates a wide variety of major operating systems drivers with the full suite of web-based enterprise management utilities including HPE Intelligent Provisioning and HPE Systems Insight Manager that simplify network management. This approach provides a more robust and reliable networking solution than offerings from other vendors and provides users with a single point of contact for both their servers and their network adapters.

Single-Root I/O Virtualization
Single-Root I/O Virtualization (SR-IOV) provides a mechanism to bypass the host system hypervisor in virtual environments providing near metal performance and server efficiency. SR-IOV provides mechanism to create multiple Virtual Functions (VFs) to share single PCIe resources. The device is capable of SR-IOV, and requires Server BIOS support, controller firmware, and OS support.

TCP/UDP/IP
For overall improved system response, this adapter supports standard TCP/IP offloading techniques including: TCP/IP, UDP checksum offload (TCO) moves the TCP and IP checksum offloading from the CPU to the network adapter. Large send offload (LSO) or TCP segmentation offload (TSO) allows the TCP segmentation to be handled by the adapter rather than the CPU.

TOE
TCP/IP Offload Engine (TOE) shifts the processing of data in the TCP protocol stack from the server CPU to the adapter's processor, freeing server CPU cycles for other operations.

Tunnel Offload
Minimize the impact of overlay networking on host performance with tunnel offload support for VXLAN, NVGRE and GENEVE. By offloading packet processing to adapters, customers can use overlay networking to increase VM migration flexibility and virtualized overlay networks with minimal impact to performance. HPE Tunnel Offloading increases I/O throughput, reduces CPU utilization, and lowers power consumption. Tunnel Offload supports VMware's VXLAN, Microsoft's NVGRE solutions and Generic Network Virtualization Encapsulation (GENEVE) solutions.

VMware NewQueue and Microsoft Virtual Machine Queue (VMQ)
VMware NetQueue is technology that significantly improves performance of 10 Gigabit Ethernet network adapters in virtualized environments. Windows Hyper-V VMQ (VMQ) is a feature available on servers running Windows Server 2008 R2 with VMQ-enabled Ethernet adapters. VMQ uses hardware packet filtering to deliver packet data from an external virtual machine network directly to virtual machines, which reduces the overhead of routing packets and copying them from the management operating system to the virtual machine.

Wake-on-LAN
This adapter provides Wake-on-LAN (WoL) support through the PCI Express bus. A system that supports Wake-on-LAN cfaan remain available to the systems administrator during its normal downtime. Once the machine is awakened, the systems administrator can remotely control, audit, debug, or manage the machine.

Contact us if you have any question about this product to verify the compatibility of this model with your current server or storage array.