HPE MB6000JEQUV 6TB 7200RPM 3.5in SAS-12G Midline G4-G7 HDD

HPE Helium MB6000JEQUV 6TB 7200RPM 3.5inch Large Form Factor SAS-12Gbps Midline Hard Drive for ProLiant Generation1 to Generation7 Servers (New Sealed Spare with 1 Year Warranty)

HPE Server Midline Hard Drives deliver the highest capacity, performance and reliability to your datacenter applications. Midline hard drives allow you to store more data without sacrificing performance or reliability; they are ideal to store all your bulk storage requirements. HPE Server Midline Hard Drives are available in both 3.5-inch Large Form Factor (LFF) and 2.5-inch Small Form Factor (SFF) and ship with a standard one-year warranty. All HPE hard drives pass a rigorous qualification process, which certify that every drive is proven to perform in your HPE ProLiant Server environments. Before final certification, all HPE Server Midline Hard Drives are optimized for compatibility and functionality, including support of SMART and HPE Systems Insight Manager.

HPE Supports Your Data-Driven Applications With a Broad Portfolio of HDDs
HPE Server Midline Hard Drives are ideal for the growing volume of digital content, bulk data storage, cloud and web infrastructure environments
Broad portfolio of HDDs, optimized for HPE server platforms, provide up to 14 TB of storage
Available in 2.5-inch Small Form Factor and 3.5-inch Large Form Factor in a wide variety of capacity points
Simplify HDD planning and standardize HDDs across HPE server and storage solutions
Common HDD carriers offer consistency and compatibility across HPE server platforms

Engineered to Deliver High Performance and Reliability Across HPE server and Storage Platforms
HPE HDDs are tuned and tested with on-going quality monitoring throughout their lifecycle
HPE optimizes HDD firmware for predictable and consistent HDD performance
HPE's industry-leading rigorous testing and qualification program is backed by 3.35 million test hours
Pre-failure Alerts with HPE Smart Array Controller, Systems Insight Manager, and HPE Smart firmware
3x faster firmware and software updates with HPE Service Pack for ProLiant (HPE SPP)

HPE HDDs are Designed to Deliver Enterprise Class Security at Both Hardware and Firmware Levels
HPE Digitally Signed Firmware helps prevent against malicious attacks
HPE Smart Array SR Secure Encryption is a FIPS 140-2 Level 1 validated enterprise class controller-based encryption solution for data-at-rest on all SAS/SATA drives
HPE Smart Carriers report drive activity and health

Support Entry/SMB servers with value priced drives
HPE Server Midline Hard Drives have lower start-up costs without sacrificing reliability at the lowest $/GB.
Non-mission critical hard drives at the lowest $/GB.
6 Gb/sec data transfer rate to support existing servers.

Helium Drives
Although hard drives are sealed, they have air inside. Air can create turbulence-induced risk vibrations which can limit the storage density of HDDs. Newer helium-filled drives virtually eliminate turbulence because helium is 1/7th as dense as air. This lower density allows the read/write mechanism to spin more easily and precisely, with less drag. Less internal turbulence means the drive platters can be closer together, allowing more platters and increasing the capacity potential in the same space. Less turbulence also means helium drives tend to use less power, and run cooler and quieter.

Serial Attached SCSI (SAS) is the logical evolution of SCSI including its long-established software advantage and the serial physical connection interface. With enterprise storage requirements escalating and becoming more complex factors such as larger capacity greater density security scalability and accessibility are more critical than ever. Enterprise data centers must be online all the time fulfill requests from numerous users simultaneously allow for constant growth and expansion and be maintained while in operation. Serial Attached SCSI (SAS) meets all these demands while providing the highest performance.

The HPE MB6000JEQUV Midline Hard Drive has a 3.5 inch form factor and a 12 Gbps external data transfer rate. It has a spindle speed of up to 7200 RPM and a 6 TB capacity. This Large Form Factor hard drive uses a SAS-12Gbps (serial attached SCSI) interface and has 1 Year Warranty.

Specification

Brand: HPE
MPN: MB6000JEQUV

Option Part Number: 793697-B21
Spare Part Number: 793770-001
Model Number: MB6000JEQUV
Assembly Number: 791394-001

General

Device Type: Hard drive - hot-swap
Capacity: 6 TB
Form Factor: 3.5 inch LFF
Interface: SAS-12Gbps
Bytes per Sector: 512
Carrier Type: Standard Carrier
Format Type: 512e
Features: Advanced format 512e, filled with Helium

Performance

Drive Transfer Rate: 1.2 GBps (external)
Seek Time: 8.5 ms (average) / 16 ms (max)
Track-to-Track Seek Time: 0.25 ms
Spindle Speed: 7200 RPM

Expansion & Connectivity

Interfaces: 1 x SAS 12 Gb/s
Compatible Bays: 3.5" LFF

Product Dimensions

Height: 1.00 inch
Width: 4.40 inch
Depth: 7.40 inch

Environmental Parameters

Min Operating Temperature: 50 °F
Max Operating Temperature: 95 °F

Compatibility Information

Designed For

HPE Disk Enclosure D6000 (3.5 inch LFF), D6000 with Dual I/O Modules (3.5 inch LFF)

Please contact with us if you have any question or to know the compatibility of this with your current server or storage array.