HPE P09165-H21 14TB 7200RPM 3.5in DS SATA-6G LP Midline G9 G10 HDD

HPE Helium P09165-H21 14TB 7200RPM 3.5inch LFF Digitally Signed Firmware (DS) 512e SATA-6Gbps Low Profile (LP) Business Critical Midline Hard Drive for ProLiant Gen9 Gen10 Servers (Brand New with 3 Years Warranty)

HPE Business Critical Hard Drives are engineered to deliver the highest capacity, performance, reliability and data security across your data center applications. Business Critical hard drives allow you to store more data without sacrificing performance or reliability. HPE Business Critical Hard Drives are available in both 3.5-inch Large Form Factor (LFF) and 2.5-inch Small Form Factor (SFF) and ship with a standard one-year warranty. All HPE hard drives pass a rigorous qualification process, which certify that every drive is proven to perform in your HPE server and storage environments. All HPE hard drives include digitally signed firmware which helps prevent unauthorized access to your data.

HPE Hard Drives Deliver High Performance and Reliability Across HPE Server and Storage Platforms
HPE Hard Disk Drives (HDDs) are enterprise-class drives for demanding 24x7 data center environments
HPE HDDs are validated and tested with on-going quality monitoring throughout their lifecycle

Maximize Total Server Storage Capacity for Business Critical Workloads with HPE HDDs
HPE offers highest capacity 16 TB and 14 TB hard drives that are ideal for digital content, bulk storage, cloud and web environments

HPE HDDs are Engineered to Deliver High Capacity, Performance, Reliability and Data Security
HPE HDDs are engineered to maximize total server storage capacity within data center environments
HPE HDDs help prevent unauthorized access to your data with Digitally Signed Firmware
HPE HDDs help simplify the cost and complexity of re-purposing or disposing of drives while protecting data with Instant Secure Erase (ISE) technology
Simplify HDD planning and standardize HDDs across HPE server and storage solutions
Common HPE HDD carriers offer consistency and compatibility across HPE server and storage platforms

HPE Server Midline Hard Drives deliver the highest capacity, performance and reliability to your datacenter applications. Midline hard drives allow you to store more data without sacrificing performance or reliability; they are ideal to store all your bulk storage requirements. HPE Server Midline Hard Drives are available in both 3.5-inch Large Form Factor (LFF) and 2.5-inch Small Form Factor (SFF) and ship with a standard one-year warranty. All HPE hard drives pass a rigorous qualification process, which certify that every drive is proven to perform in your HPE ProLiant Server environments. Before final certification, all HPE Server Midline Hard Drives are optimized for compatibility and functionality, including support of SMART and HPE Systems Insight Manager.

HPE Supports Your Data-Driven Applications With a Broad Portfolio of HDDs
HPE Server Midline Hard Drives are ideal for the growing volume of digital content, bulk data storage, cloud and web infrastructure environments
Broad portfolio of HDDs, optimized for HPE server platforms, provide up to 14 TB of storage
Available in 2.5-inch Small Form Factor and 3.5-inch Large Form Factor in a wide variety of capacity points
Simplify HDD planning and standardize HDDs across HPE server and storage solutions
Common HDD carriers offer consistency and compatibility across HPE server platforms

Engineered to Deliver High Performance and Reliability Across HPE server and Storage Platforms
HPE HDDs are tuned and tested with on-going quality monitoring throughout their lifecycle
HPE optimizes HDD firmware for predictable and consistent HDD performance
HPE's industry-leading rigorous testing and qualification program is backed by 3.35 million test hours
Pre-failure Alerts with HPE Smart Array Controller, Systems Insight Manager, and HPE Smart firmware
3x faster firmware and software updates with HPE Service Pack for ProLiant (HPE SPP)

HPE HDDs are Designed to Deliver Enterprise Class Security at Both Hardware and Firmware Levels
HPE Digitally Signed Firmware helps prevent against malicious attacks
HPE Smart Array SR Secure Encryption is a FIPS 140-2 Level 1 validated enterprise class controller-based encryption solution for data-at-rest on all SAS/SATA drives
HPE Smart Carriers report drive activity and health

Support Entry/SMB servers with value priced drives
HPE Server Midline Hard Drives have lower start-up costs without sacrificing reliability at the lowest $/GB.
Non-mission critical hard drives at the lowest $/GB.
6 Gb/sec data transfer rate to support existing servers.

Helium Drives
Although hard drives are sealed, they have air inside. Air can create turbulence-induced risk vibrations which can limit the storage density of HDDs. Newer helium-filled drives virtually eliminate turbulence because helium is 1/7th as dense as air. This lower density allows the read/write mechanism to spin more easily and precisely, with less drag. Less internal turbulence means the drive platters can be closer together, allowing more platters and increasing the capacity potential in the same space. Less turbulence also means helium drives tend to use less power, and run cooler and quieter.

Digitally Signed Firmware: Prevent unauthorized access to your data with the expansion of integrated HPE Digitally Signed Firmware (DS) on new drives; providing the security and assurance that drive firmware comes from a trusted source and protects against malicious attacks.

The HPE P09165-H21 Business Critical Helium Hard Drive has a 3.5 inch form factor and 6 Gbps external data transfer rate. It has a spindle speed up to 7200 RPM and has a 14 TB storage capacity. This Large Form Factor Midline Hard Drive uses a SATA-6Gbps interface and comes in a Low Profile Carrier with 3 Years Warranty.

Specification

Brand: HPE
MPN: P09165-H21

Option Part Number: P09165-H21
Spare Part Number: P11519-001
Model Number: MB014000GWTFF
Assembly Number: P04386-002

General

Device Type: Hard Drive - Hot-Swap
Capacity: 14 TB
Form Factor: 3.5 inch LFF
Interface: SATA 6Gbps
Carrier Type: Low Profile Carrier (LPC)
Bytes per Sector: 512
Drive Technology (Fill): Helium (He)
Format Type: 512e
Connectivity: Dual Port
Plug Type: Hot Pluggable
Workload Type: Midline
Features: Advanced Format 512e, Digitally Signed Firmware
Bundled with: HPE Low Profile Carrier (LPC)
Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy

Performance

Drive Transfer Rate Synchronous (Max): 6 Gb/sec
Drive Rotational Speed: 7200 RPM
OD Media Rate, Max Sequential Throughput (MiB/s): 250
128Kib Random Rd (IOPs): 105
128Kib Random 70% RD/ 30% WT (IOPs): 115
128Kib Random 50% RD/ 50% WT (IOPs): 120

Expansion & Connectivity

Interfaces: 1 x SATA 6 Gb/s
Compatible Bay: 3.5" LFF

Power Requirement

Idle Time: 4.90 Watts
Random R/W: 8.50 Watts
Sequential Read: 6.90 Watts
Sequential Write: 6.60 Watts

Environmental Parameters

Max. Operating Temperature: 50° F (10°C)
Min. Operating Temperature: 95° F (35°C)

Drive Dimensions

Height: 1.028 inch (26.10 mm)
Width: 4.15 inch (105.50 mm)
Depth: 6.16 inch (156.58 mm)

Product Dimensions & Weight (Shipping)

Height: 5.74 inch (14.58 cm)
Width: 8.63 inch (21.92 cm)
Depth: 10.00 inch (25.40 cm)
Weight: 3.00 lbs (1.36 kg)

Compatibility Information

Designed for

HPE Apollo 4200 Gen9 for Google (3.5 inch), 4510 Gen9 (3.5 inch), 4530 Gen9 (3.5 inch)

HPE ProLiant DL Series: DL325 Gen10 Base (3.5 inch), DL325 Gen10 Plus (3.5 inch), DL325 Gen10 Solution (3.5 inch), DL385 Gen10 Plus (3.5 inch), DL385 Gen10 Plus Entry (3.5 inch)

HPE ProLiant ML Series: ML30 Gen10 (3.5 inch), ML30 Gen10 Entry (3.5 inch), ML30 Gen10 Performance (3.5 inch), ML30 Gen10 Solution (3.5 inch)

Please contact with us if you have any question or to know the compatibility of this with your current server or storage array.