HPE Q1J11A 48TB D3610 SC with 12x4TB 12G SAS 7.2K 3.5in Midline HDD

HPE Q1J11A 48TB Bundle and D3610 Smart Carrier with 12x4TB (12G SAS 7.2KRPM 3.5inch LFF Midline HDD)

Affordable storage for capacity demand
HPE D3000 Enclosures 12Gbps SAS provides a higher level of redundancy and reliability, reducing single-points-of-failure within the storage network. The modular platform provides investment protection by allowing purchases based on your current need and future plans without hidden management fees.

Flexible and scalable with room to expand
The HPE D3000 Enclosures give you the flexibility to mix and match SAS, SATA and Solid State drives in the same enclosure, and extend the benefit of tiered storage to your customers.

Easy to manage
The HPE D3000 Enclosures support the HPE SmartDrive carrier, enabling a single set of common drives for Gen8 and Gen9 ProLiant servers and D3000 Enclosures.

HPE D3000 enclosures support HPE SmartDrive Carriers. Maintain a common set of HPE ProLiant Drives for Gen8 and Gen9 ProLiant Servers. Total support can grow up to 96 LFF or 200 LFF Drives. The modular platform provides investment protection by allowing purchases based on current storage need and future plans without hidden management cost. Increase data speed with Enterprise class, Dual Port SAS Drives as per requirement. The HPE D3610 and HPE D3710 standardizing on a new Gen10 Branding/Industrial design to align with ProLiant Gen10 Servers. Designed to allow further expand as per storage requirement increase, the HPE D3600 and the Gen10 Branded HPE D3610 LFF can swell to 96 drives. Van also add up to eight HPE D3600 or HPE D3610 LFF enclosures from a single controller port. With the HPE D3700 and the Gen10 Branded HPE D3710 SFF can increase to 200 Drives or up to eight SFF enclosures from a single controller port. Smart Array Controllers allow mixing D3600 or the D3610 and the D3700 or the D3710 enclosures for expansion, up to four D3600 or D3610 and four D3700 or D3710 (4x LFF and 4x SFF) allowing for expansion up to 148 drives. Solid State Drive support for up to 25 Drives per Smart Array Controllers on all HPE D3000 models. Easy to manage the HPE D3000 enclosures support the HPE SmartDrive Carrier, enabling a single set of common Drives for Gen8 and Gen9 ProLiant Servers and D3000 enclosures. The HPE D3000 enclosures uses familiar HPE ProLiant management tools including HPE systems insight manager and the HPE Array Configuration Utility (ACU) software. The HPE D3000 enclosures are compatible with selected HPE Smart Array SAS Controllers and HBAs. Little IT expertise is required to manage these enclosures.

The HPE Q1J11A Model Storage Enclosure and HDD Bundle has a HPE D3610 Smart Carrier 3.5inch LFF Enclosure with 12 units of 4TB 12G SAS 7.2K LFF (3.5in) Midline Hard Drive and a total capacity of 48TB. This Large Form Factor Storage Enclosure and HDD Bundle uses a SAS-12Gbps (serial attached SCSI) interface and has 3 Years Warranty.

Specification

Brand: HPE
MPN: Q1J11A
Model: Q1J11A

General

Device Type: Storage enclosure
Enclosure Type: Rack-mountable - 2U

Chassis

Installed Devices / Modules Qty: 12
Supported Devices / Modules Qty: 12
Supported Drives: SATA-600 / SAS-3

Environmental Parameters

Min Operating Temperature: 50 °F
Max Operating Temperature: 104 °F
Humidity Range Operating: 10 - 90%
Sound Emission: 53 dBA

Expansion / Connectivity

Expansion Bays: 12 (total) / 0 (free) x hot-swap - 3.5" LFF

Hard Drive

Type: HDD
Capacity: 12 x 4 TB
Interface Type: SAS 12Gb/s
Spindle Speed: 7200 rpm
Features: Midline

Miscellaneous

Features: Redundant fans, firmware upgradable, 92% efficiency power supply
Cables Included: 2 x mini SAS HD cable - 1.6 ft
Included Accessories: Rack mounting kit, 2 x PDU interconnect cords

Power

Power Device: 2 x internal power supply - hot-plug
Max Supported Qty: 2
Power Redundancy: Yes
Power Redundancy Scheme: 1+1
Voltage Required: AC 120/230 V - 50/60 Hz
Power Consumption Operational: 403 Watt
Power Provided: 460 Watt
80 PLUS Certification: 80 PLUS Gold