Brand: HP (Genuine)
HPE Q1J17A 30TB D3710 SC with 25x1.2TB 12G SAS 10K 2.5" Enterprise HDD
HPE Q1J17A 30TB Bundle and D3710 Smart Carrier with 25 x 1.2TB (12G SAS 10kRPM 2.5inch SFF Enterprise HDD)
HPE D3000 enclosures support HPE SmartDrive Carriers. Maintain a common set of HPE Proliant Drives for Gen8 and Gen9 Proliant Servers. Total support can grow up to 96 LFF or 200 LFF Drives. The modular platform provides investment protection by allowing purchases based on current storage need and future plans without hidden management cost. Increase data speed with Enterprise class, Dual Port SAS Drives as per requirement. The HPE D3610 and HPE D3710 standardizing on a new Gen10 Branding/Industrial design to align with Proliant Gen10 Servers. Designed to allow further expand as per storage requirement increase, the HPE D3600 and the Gen10 Branded HPE D3610 LFF can swell to 96 drives. Van also add up to eight HPE D3600 or HPE D3610 LFF enclosures from a single controller port. With the HPE D3700 and the Gen10 Branded HPE D3710 SFF can increase to 200 Drives or up to eight SFF enclosures from a single controller port. Smart Array Controllers allow mixing D3600 or the D3610 and the D3700 or the D3710 enclosures for expansion, up to four D3600 or D3610 and four D3700 or D3710 (4x LFF and 4x SFF) allowing for expansion up to 148 drives. Solid State Drive support for up to 25 Drives per Smart Array Controllers on all HPE D3000 models. Easy to manage the HPE D3000 enclosures support the HPE SmartDrive Carrier, enabling a single set of common Drives for Gen8 and Gen9 Proliant Servers and D3000 enclosures. The HPE D3000 enclosures uses familiar HPE Proliant management tools including HPE systems insight manager and the HPE Array Configuration Utility (ACU) software. The HPE D3000 enclosures are compatible with selected HPE Smart Array SAS Controllers and HBAs. Little IT expertise is required to manage these enclosures.
The HPE Q1J17A Model Storage Enclosure and HDD Bundle has a HPE D3710 Smart Carrier 2.5inch SFF Enclosure with 25 units of 1.2TB 12G SAS 10K SFF (2.5in) Enterprise Hard Drive and a total capacity of 30TB. This Small Form Factor Storage Enclosure and HDD Bundle uses a SAS-12Gbps (serial attached SCSI) interface and has 3 Years Warranty.
Device Type: Storage enclosure
Enclosure Type: Rack-mountable - 2U
Installed Devices / Modules Qty: 25
Supported Devices / Modules Qty: 25
Supported Drives: SATA-600 / SAS-3
Min Operating Temperature: 50 °F
Max Operating Temperature: 104 °F
Humidity Range Operating: 10 - 90%
Sound Emission: 53 dBA
Expansion / Connectivity
Expansion Bays: 25 (total) / 0 (free) x hot-swap - 2.5" SFF
Capacity: 25 x 1.2 TB
Interface Type: SAS 12Gb/s
Spindle Speed: 10000 rpm
Features: Redundant fans, firmware upgradable, 92% efficiency power supply
Cables Included: 2 x mini SAS HD cable - 1.6 ft
Included Accessories: Rack mounting kit, 2 x PDU interconnect cords
Power Device: 2 x internal power supply - hot-plug
Max Supported Qty: 2
Power Redundancy: Yes
Power Redundancy Scheme: 1+1
Voltage Required: AC 120/230 V - 50/60 Hz
Power Consumption Operational: 403 Watt
Power Provided: 460 Watt
80 PLUS Certification: 80 PLUS Gold
Affordable storage for capacity demand
HPE D3000 Enclosures 12Gbps SAS provides a higher level of redundancy and reliability, reducing single-points-of-failure within the storage network. The modular platform provides investment protection by allowing purchases based on your current need and future plans without hidden management fees.
Flexible and scalable with room to expand
The HPE D3000 Enclosures give you the flexibility to mix and match SAS, SATA and Solid State drives in the same enclosure, and extend the benefit of tiered storage to your customers.
Easy to manage
The HPE D3000 Enclosures support the HPE SmartDrive carrier, enabling a single set of common drives for Gen8 and Gen9 ProLiant servers and D3000 Enclosures.
3 Years Warranty
Find Similar Products by Category
Customers also Viewed